Opis
Arduino M5Stack U032 GPS.
- Can receive data from 3 GNSS systems at the same time
- Horizontal position accuracy: At least 2.5 m.
- GPS Module (NEO-M8N) Integrated Flash so you can update the firmware from u-center-just-for-Windows
- Supported protocols: NMEA, UBX, RTCM
- Industry-leading sensitivity of -167 dBm
- Backward compatibility with NEO-7 and NEO-6 series
The GPS module from the M5Stack series is equipped with NEO-M8N, u-blox M8 simultaneous GNSS modules and an active antenna.
The NEO-M8 series offers high sensitivity and minimum acquisition times with low system performance.
The NEO-M8N has a 72-channel U-Blox M8 GNSS engine that supports multiple GNSS systems (Beidou, Galileo, GLONASS, GPS/QZSS) and can receive 3 GNSS systems simultaneously.
The serial communication protocol between M5Core and GPS is UART, physically connected via UART2 (GPIO16, GPIO17)
To change the UART baud rate, visit -> www u-blox.com/en/product/u-center
* Note: The GPS signal can only be found outdoors
This text is machine translated.
