Name: Tester fiber optičkih kablova UNI-T UT695D-10
SKU: 12175
Availability: InStock

Opis

Ručni tester ispitivač, mini optički multimetar UT695D-10 integriše tri funkcije: merenje snage optičkog signala, otkrivanje kontinuiteta optičkih vlakana i testiranje redosleda žica u LAN kablovima.

The device has an ergonomic design and high resistance to dust and water (IP54 protection) and is designed for professional use in the construction and maintenance of optical telecommunications networks. The device has built-in universal optical connectors FC / SC / ST. In the left connector is the output of a laser source with a wavelength of 650nm and an optical power of 10mW, which is enough to measure optical cables with a length of up to 10km and detect faults on these cables. The right optical connector is the input of an optical power meter at calibrated wavelengths of 800 to 1700 nm with an lnGaAs detector. At this input, the optical multimeter can automatically identify the modulation frequency of 0 Hz, 270 Hz, 1000 Hz and 2000 Hz emitted by the light source. It is possible to measure the absolute power of the incoming beam in linear values (in nW, μW, mW) or logarithmic values (in dBm). It is also possible to measure relative power losses on an optical fiber or passive optical elements. The device has an ultra-wide range of optical power testing, automatic identification of light modulation frequency, automatic shutdown, wavelength memory, user calibration, display backlight, built-in LED flashlight. For testing metallic LAN lines, the main unit and the detachable receiving part have RJ45 connectors with a series of nine indicator LEDs. The device complies with EN61326-1: 2013 and EN61326-2-2: 2013.

Product parameters :

– measurement of absolute radiation powers in optical fibers
– measurement of radiation power losses on passive elements and long sections of optical fibers
– detection of optical set failure, location of optical fiber breakpoint
– identification of the optical file between the endpoints
– simultaneous measurement in linear (mW, nW, μW) and logarithmic (dBm) units
– optical transmitter 650nm / 10mW
– optical receiver with calibrated wavelengths
– beam modulation detection
– user self-calibration function
– lithium battery powered for ≥60 hours of operation
– resistance to falling from a height of 2m
– dust and water resistance IP54 (main unit only)
– test the order of metallic wires in LAN cables

Technical parameters :

– optical connectors: FC, SC and ST
– type of optical power meter detector: lnGaAs
– wavelength range of the optical power meter: 800 nm to 1700 nm
– calibrated receiver wavelengths: 850nm, 980nm, 1300nm, 1310nm, 1490nm, 1550nm, 1625nm, 1650nm
– power measurement range: -70 ~ 3dBm
– power measurement uncertainty: ± 5%
– display resolution: linear: 0.1%; logarithmic: 0.01 dBm
– error locator – laser source: wavelength 650nm ± 10nm
– power supply: 10 mW (max. measurable length of optical fiber 8 to 10 km)
– display: multi-line, backlit, dimensions 42 mm x 33 mm
– power supply: 1050mAh lithium battery
– endurance of work on one charge: ≥60 hours
– power consumption: <30 mA when the visual fault locator function is switched off
– power consumption: <130 mA when the visual fault locator function is switched on
– low battery indication: at 3.3 V
– automatic shutdown: at 3V
– built-in LED flashlight
– operating temperature / humidity: 0 ° C – 40 ° C / 20 – 75% RH (no condensation)
– storage temperature / humidity: -10 ° C – 50 ° C / 10 – 90% RH (no condensation)
– working altitude: ≤2000 m
– protection: IP54 (main unit only)
– product color: red and gray
– product size: 132 x 68 x 31 mm
– net weight of the product: 168 g