Pozovi nas
Piši nam
Pico-Sensor-Kit is a PICO entry-level sensor kit, including common sensors such as LED, buttons, and buzzers, which is easy for beginners to get started.
All-in-one design, all the modules are connected with PCB castellated holes, which is not needed to be soldered or wired anymore. Hence, you do not need to worry about the wiring. and it can provide you with an excellent programming experience.
Of course, you can separate these modules, and then connect them with the wires we provided, and these modules are easy to be integrated into your projects.
- PS: Please pay attention to the sharp cuts and fragments when disassembling the modules.
https://www.waveshare.com/wiki/Pico-Sensor-Kit-B
Parameters
Pico-sensor-kit includes 15 modules in total. For more details, please refer to the following table.
| Module | Module Connection Port | Description |
| Button Module | D0 | Detect whether the button is pressed, for human-computer interaction |
| LED Module | D1 | Emit light by inputting electrical signal |
| Buzzer Module | D2 | Sound by the frequency of the input electrical signal |
| IR Receiver Module | D3 | Accept infrared remote control signal and output electrical signal |
| IR Transmitter Module | D4 | Emit infrared light at the frequency of the input electrical signal |
| RGB LED Module | D7 | Full-color lights controlled by a single bus |
| 6-axis Sensor Module | I2C0 (ADDR:0 X 6B) | 6-axis attitude sensor |
| VOC Sensor Module | I2C0 (ADDR:0 X 59) | VOC (Volatile Organic Compound) sensor |
| EEPROM Module | I2C0 (ADDR:0 X 50) | Electrically erasable programmable read-only memory, which can be used to store offline data |
| Temperature/Humidity Sensor Module | I2C0 (ADDR:0 X 70) | Low power consumption temperature and humidity sensor |
| Motor Driver Module | I2C0 (ADDR:0 X 40) | Can be used to drive four 5V motors |
| OLED Module | I2C1 (ADDR:0 X 3D) | 1.5-inch OLED module, 128 × 128 resolution, 16 grayscale display |
| Photoresistor Module | ADC0 | For detecting the brightness |
| Potentiometer Module | ADC1 | Can be used to simulate voltage changes |
| Voice Sensor Module | ADC2 | Can be used to detect ambient sound |
- PS: Onboard 3.3V for DC-DC output, the maximum current is 2A if the motor driver board power supply should pay attention to its current.
- The motor driver board is recommended to use an external power supply, which can improve system stability.
Dostava i plaćanje
Elektroleum sarađuje sa “AKS Express” kurirskom službom i pošiljka će biti poslata preko “AKS Express”-a uslugom "danas za sutra" osim ukoliko kupac ne naglasi drugačije. Napominjemo da kurirska služba od nas preuzima pošiljke od ponedeljka do petka oko 15 časova i isporuke se vrši samo radnim danima. Kupac ima pravo da zahteva slanje pošiljke na način koji njemu najviše odgovara, a mi ćemo se potruditi da ispunimo njegov zahtev. Plaćanje otkupne vrednosti je moguće u gotovini ili platnim karticama ( Visa, Master, Dina Card ).
Opšti uslovi
Nakon prijema on-line porudžbine, prodavac je obavezan da izvrši telefonsku ili pismenu potvrdu porudžbine.
Prodavac se obavezuje da naručene proizvode isporuči nove, ispravne i u predviđenom roku.
U slučaju bilo kakve promene prodavac je dužan da obavesti kupca prilikom potvrde porudžbine.
Napomene
Elektroleum je specijalizovana online platforma namenjena privredi i fizičkim licima.
U ponudi imamo na stotine hiljada različitih artikala i njihova dostupnost i rok isporuke može varirati od trenutka porudžbine.
O raspoloživosti poručene robe i uslovima prodaje bićete obavešteni nakon obrade porudžbine.
*Slike proizvoda na sajtu su informativnog karaktera i mogu se razlikovati od proizvoda.
