Pozovi nas
Piši nam
A complete debug hardware solution for arm-based microcontrollers operated by RP2040. With a USB-to-serial two-wire debug bridge and a USB-to-UART bridge, the debug probe facilitates the use of devices such as the Raspberry Pi pico with a range of host platforms such as PC, Mac and typical Linux computers.A complete kit for easy plug-and-play debuggingThe Raspberry Pi Debug Probe is a complete USB-to-debug kit that provides all the necessary hardware and cables for simple, solder-free plug-and-play debugging.It has both a serial debug interface for the processor (the arm serial wire debug interface is standard, but other interfaces can be supported) and an industry standard UART interface. Both interfaces use the 3-pin debug port of the Raspberry Pi as described in the Raspberry Pi 3-pin debug connector specification.The Raspberry Pi Debug Probe is a kit that contains the debug probe hardware in a separate plastic housing along with a USB cable and three types of debug cables that cover the vast majority of debug applications. It is designed to facilitate debugging and programming of Raspberry Pi pico and RP2040 with a range of host platforms, including Windows, Mac, and typical Linux computers that do not have a GPIO header to connect directly to the pico serial UART or SWD port.Although designed for use with Raspberry Pi products, the Debug Probe provides standard UART and CMSIS DAP interfaces via USB, so it can also be used to debug arm-based microcontrollers that offer a 3V3-I/O SWD port, or even as a USB-to-UART cable. It works with OpenOCD and other tools that support CMSIS-DAP.The Debug Probe is based on the Raspberry Pi Pico hardware and runs the open-source software Raspberry Pi Picoprobe. The firmware is updated in the same way as the Raspberry Pi Pico firmware, so it is easy to keep the device up to date with the latest firmware or to use your own firmware.
This text is machine translated.
Highlights & Details
Debugging adapter for finding and analyzing errors in microcontroller softwareIdeal for examining codes for the Raspberry Pi pico using the RP2040 microcontroller
Facts
Form factor 22mm × 32mmUSB-to-2-wire serial debugging bridge (Arm Serial Wire Debug supported by default)USB-to-UART BridgeCompatible with the CMSIS DAP standardWorks with OpenOCD and other tools that support CMSIS-DAPMeets the Raspberry Pi 3-pin Debug Connector specificationContains a high-quality transparent plastic caseIncludes one USB cable and three debug cables: 3-pin JST plug on 3-pin JST plug cable; 3-pin JST plug on 0.1-inch header (female); 3-pin JST plug on 0.1-inch header (male)Nominal I/O voltage 3.3 V
Dostava i plaćanje
Elektroleum sarađuje sa “AKS Express” kurirskom službom i pošiljka će biti poslata preko “AKS Express”-a uslugom "danas za sutra" osim ukoliko kupac ne naglasi drugačije. Napominjemo da kurirska služba od nas preuzima pošiljke od ponedeljka do petka oko 15 časova i isporuke se vrši samo radnim danima. Kupac ima pravo da zahteva slanje pošiljke na način koji njemu najviše odgovara, a mi ćemo se potruditi da ispunimo njegov zahtev. Plaćanje otkupne vrednosti je moguće u gotovini ili platnim karticama ( Visa, Master, Dina Card ).
Opšti uslovi
Nakon prijema on-line porudžbine, prodavac je obavezan da izvrši telefonsku ili pismenu potvrdu porudžbine.
Prodavac se obavezuje da naručene proizvode isporuči nove, ispravne i u predviđenom roku.
U slučaju bilo kakve promene prodavac je dužan da obavesti kupca prilikom potvrde porudžbine.
Napomene
Elektroleum je specijalizovana online platforma namenjena privredi i fizičkim licima.
U ponudi imamo na stotine hiljada različitih artikala i njihova dostupnost i rok isporuke može varirati od trenutka porudžbine.
O raspoloživosti poručene robe i uslovima prodaje bićete obavešteni nakon obrade porudžbine.
*Slike proizvoda na sajtu su informativnog karaktera i mogu se razlikovati od proizvoda.
