Pozovi nas
Piši nam
It is designed specifically for the Raspberry Pi, which has an optional three-color RGB backlight, you can choose according to different situations different colors, to meet the different needs of users.
Raspberry Pi RGB-LCD1602 module is designed specifically for the Raspberry Pi, , which has an optional three-color RGB (red, green, blub) backlight, you can choose according to different situations different colors, to meet the different needs of users, with three independent dimming pin, which could be mixed to form a more brilliant color. using a dot matrix liquid crystal display (LCD), displays 16 characters X2 line of characters, the character size is 2.95X4.35 (WXH) mm, built-HD44780 type LCD controller interfaces can be directly connected to the MCU.
- It’s a LCD display which can show two lines and 16 characters on it. and it easy to use a blue and white 16×2 Character LCD.
- It’s based on I2c protocol and it can communicate with your Pi with less wire.
- With this in mind, we wanted to make it easier for people to get these LCD into their projects so we devised a Pi plate that lets you control a 16×2 Character LCD,
- up to 3 led pins(RGB backlight) AND 5 keypad pins with pull-up resister using only the two I2C pins on the R-Pi!
- The best part is you don’t really lose those two pins either, since you can stick i2c-based sensors, RTCs, etc and have them share the I2C bus.
- This is a super slick way to add a display without all the wiring hassle. This pi plate is perfect for when you want to build a stand-alone project with its own user interface.
- The 4 directional buttons plus select button allows basic control without having to attach a bulky computer.
- The plate is designed for both Revision 1 and Revision 2 Raspberry Pi’s. It uses the I2C (SDA/SCL) pins, RGB backlight is controlled by Raspberry Pi GPIO pin and you can make it as breath light with softPWM.
- To keep them from shorting against the metal, a piece of electrical tape must be placed onto the USB ports.
- Display construction: 16 Characters * 2 Lines
- Dimensions: 5.74cm × 8.24cm
- Comes with a 16×2 Blue & White LCD
- Plug and play with any Raspberry Pi
- Uses only the I2C (SDA/SCL) pins
- This board/chip uses I2C 7-bit address 0x20
- RBG backlight
- Pluggable LCD1602 module
1 x RPI 16×2 LCD + Keypad Kit
Technical details
| Dimensions | 125mm x85mm x42mm |
| Weight | G.W 103g |
| Battery | Exclude |
ECCN/HTS
| HSCODE | 8531200000 |
| USHSCODE | 8531200020 |
| UPC | 841454119586 |
Dostava i plaćanje
Elektroleum sarađuje sa “AKS Express” kurirskom službom i pošiljka će biti poslata preko “AKS Express”-a uslugom "danas za sutra" osim ukoliko kupac ne naglasi drugačije. Napominjemo da kurirska služba od nas preuzima pošiljke od ponedeljka do petka oko 15 časova i isporuke se vrši samo radnim danima. Kupac ima pravo da zahteva slanje pošiljke na način koji njemu najviše odgovara, a mi ćemo se potruditi da ispunimo njegov zahtev. Plaćanje otkupne vrednosti je moguće u gotovini ili platnim karticama ( Visa, Master, Dina Card ).
Opšti uslovi
Nakon prijema on-line porudžbine, prodavac je obavezan da izvrši telefonsku ili pismenu potvrdu porudžbine.
Prodavac se obavezuje da naručene proizvode isporuči nove, ispravne i u predviđenom roku.
U slučaju bilo kakve promene prodavac je dužan da obavesti kupca prilikom potvrde porudžbine.
Napomene
Elektroleum je specijalizovana online platforma namenjena privredi i fizičkim licima.
U ponudi imamo na stotine hiljada različitih artikala i njihova dostupnost i rok isporuke može varirati od trenutka porudžbine.
O raspoloživosti poručene robe i uslovima prodaje bićete obavešteni nakon obrade porudžbine.
*Slike proizvoda na sajtu su informativnog karaktera i mogu se razlikovati od proizvoda.
