Opis
Tester / ispitivač HDMI kablova MT-7062 – merni i test instrumenti Elektroleum.
The MT-7062 HDMI cable tester allows the fast and accurate verification of both HDMI type A and Type C cables, mapping continuity and proper configuration and displays 19 pins and shield connection status on both main and remote unit.
For HDMI cables Type A, C
Test all HDMI cables with Type A to A, A to C and C to C connectors, especially for fragile, easily damaged HDMI patch cord and in-wall HDMI cables.
Loopback function
Designed with loopback function allows test HDMI type A to A, A to C on main unit.
3 Test Modes
• Automatically fast scan for testing all conductors status in a cable
• Automatically slow scan for testing all conductor’s status in a cable
• Manual test for step by step detecting individual conductors for intermittent faults.
HDMI Cable Mapping
Automatically detect wiring on HDMI type A or type C condition in straight, short, open, crossover in all RGB conductors
Troubleshooting
Quickly troubleshoot and verify HDTV installation and DIY termination in the field.
Specification
Cable versions support: HDMI Cables with type A & C connectors conforming to 1.0, 1.1, 1.2, 1.3, 1.3a, 1.3b, 1.3c, 1.4, 1.4a, category 1 and category 2 cables
Support test (master unit and remote unit): 19 pin-to-pin wire map and shielding detection
Test interface of Master unit: HDMI (type A) ×2, Mini HDMI (type C) ×1
Test interface of Remote unit: HDMI (type A) ×1, Mini HDMI (type C) ×1
Test Mode: Fast scan / Slow scan / Step by step
Beeper indication: Yes
Low battery indication: 6.0V
Power source: DC 9V ×1 (not included)
Dimensions: Master unit: 103×66×27mm
Remote unit: 103×35×27mm
Environment: Operating: 0C to 40C <80%RH
Storage: -10C to 50C < 70%RH
Weight :130g ( not include battery)
Package: Blister Card
